Micro cards Print Factory Pro Inkjet CD / DVD printer is fully automated, with a 100-disk capacity, large individual ink cartridges CMYK and HP PC / MAC compatible. Micro Boards Automatic pressure and Burn-systems, the MX 1 and MX-2, both the same base HP inkjet heat engine.
The review of the Micro-PF Pro Boards inkjet on seven different criteria on a scale of 1 to 5 stars (5 the highest opinion of potential customers). We have over 60,000 CDs and DVDs of more than 10 different cards Micro Print Factory Pro printer in the last 45 days. And here are the results …
Prices – EIA of $ 2995 and a price of about $ route 2695th Micro Boards printer Print Factory Pro is more expensive compared to other printers such as inkjet Micro Boards PF-3 and GX Auto printer and Primera Bravo Pro, Bravo II and SE-models. 3 stars.
Speed – There are several options to resolve the Print Factory Pro. For our testing and production under way, or we text and images best “or” normal photo “options. The picture in normal mode and this slower ink for printing high resolution, the text and graphical mode . The design of the CD Artwork also affect the number of CD / DVD, which can be printed per hour. We found that on the cover of about 75 discs / hour print with a normal photo. With 30% of cover with text and graphics mode best kept about 115 discs per hour. 4.5 stars.
Tank volume – Boards PF Micro-Pro has a volume of 100 discs, CD-R or DVD-R. These batteries well to most other sub-$ 3000 automated inkjet printer. Greater ability to pay would be nice, with the addition of the largest C, M, J, K and ink cartridges. 3.5 stars.
The cost per print – With the ink jet printer, the cost of pressure variations on the combinations of colors, coverage and resolution and speed in the printer driver Print Factory Pro. We found that in full color on several disks 0.12/disc $. Discs 30% coverage, with some color and black text costs about $ 0.05/disc in ink. 5 stars.
Print Quality – Color graphics are dynamic, and printing of black text is quite. Some models, such as Micro Boards PF-3 is a little fruit with the pressure. The PF-Pro printer also has a good job with large blocks of solid colors. 4 stars.
Durability printing – inkjet printers with water-ink, so that if the CD or DVD comes in contact with moisture, pressure on the disc and the smear verschmieren. This is the case, minutes, hours, days and years after the disc is (unless you are printing on water Taiyo Yuden discs). In addition, maps Micro Print Factory Pro is permanent like any other CD-inkjet printers on the market. 2 stars.
Easy to use – The PF-Pro is equipped with a single USB 2.0 port to a PC or MAC. It comes with a familiar and easy to use CD / DVD video software SureThing name. You can default as graphical images. Jpeg,. Bmp,. Png and. Gif. The printer driver controls the robot drive system, there is no complicated software to learn. You can also directly from Adobe Illustrator and Photoshop, with some adjustments to the margin of the printer. In addition, we have been able to port 4 of the Micro-PF Boards by the printer to a PC with a USB 2.0 hub. 4.5 stars.
Maintenance – As with most inkjet CD / DVD printer, the Print Factory Pro’s internal sensors and must be cleaned every 5000 components on the disks by inkjet. In addition, there are two print heads (1 for black / yellow and 1 for the cyan / magenta), in place of each disk or 50,000 cases. We do not need all the print heads, for this review. 3.5 stars.
Technical Support – Boards Micro average telephone technical support for CD / DVD devices in the industry. After the warranty repair can be very expensive, as with other producers in this place. 4 stars.
Conclusion – Boards PF Micro-Pro (Reference # 1000-PFP) is our Top Pick for automatic inkjet printers for CD standard 120 mm CD-R, DVD-R, and Blu-ray. Highlights are the cost per print, speed, and the ability to connect multiple printers on a single PC. Micro Boards This printer is a must for any workshop jet printing ink or more than 4000 discs per year.
